240 / 250 Tire Swingarm for 2002-05 V-Rod’s

 

This cast aluminum swingarm is a bolt-on replacement for the stock Harley V-Rod swingarm and will allow you to mount up to 240 or 250 tires on 18×8.5 or 18×9 rear wheels, still keeping front and rear wheel properly lined-up. Rear wheel will still be centered in the stock V-Rod frame for good handling and safe riding. Swingarm kit includes: extra-wide swingarm, wheel axle and caps, built-in 1” lowering kit and necessary hardware. This replacement for your stock Harley V-Rod swingarm fits only 2002-05 models. Installation on 2005 models will require mounting of a 2004 or earlier stock pivot tube, tapered roller bearings, caliper and caliper bracket (or aftermarket brake for up to 2004 models).

Please note that the OEM Harley 1-3/8 inch belt cannot fit for clearance reasons. You will either need to cut the stock belt to 1-1/8 inch or purchase a new narrower one (if needed we can give you info about these two options, just send us an e-mail).

Cast Aluminum wide-tire swingarm kit must be installed with one of our offsets:
– Front Offset Pulley for V Rod (only for 2004-up models)
– Front Pulley Offset Spacer for V-Rod’s

The Cast Aluminum Swingarm for V-Rod’s look great with our:
– Bat Wheels for V-Rod’sBat Pulley for V-Rod and Bat Rotors for V-Rod
– Three Spoke Wheels for V-RodThree Spoke Pulley for V-Rod and Three Spoke Rotors for V-Rod
– Cyclone Wheels for V-Rod’sCyclone Pulley for V-Rod and Cyclone Rotors for V-Rod
– Three Spoke Cut Wheels for V-RodThree Spoke Cut Pulleys for V-Rod and Three Spoke Cut Brake Discs for V-Rod’s
– Five Spoke Wheels for V-RodFive Spoke Pulley for V-Rod and Five Spoke Rotors for V-Rod
– Blank Wheels for V-Rod’s and Blank Pulley for V-Rod
– 3D Lowrider Custom Motorcycle Wheels for V-RodLowrider Pulley for V-Rod and Lowrider Rotors for V-Rod
– 3D Open Mind Custom Motorcycle Wheels for V-RodOpen Mind Pulley for V-Rod and Open Mind Rotors for V-Rod

Looks great combined with our Stealth Body Kit for V Rods, Speed Demon Rear Fender for V-Rod’sStealth Rear Fender for V-Rod’sStreet Fighter Rear Fender for V-Rod’s or Turbo Rear Fender for V-Rod’s; but also with our airbox covers, radiator covers and front fenders for V-Rod’s, Night Rod’s, Street Rod ‘s or V-Rod Muscle’s.

NOTE: kit does not include front offset pulley, belt, wheels, rear pulley, brake calipers, rotors, tires or rear fender. Must be used with a 1-1/8 inch or narrower belt.

► Wide tire swingarm for V-Rod – mounting instructions

For more pictures of the installed product please click on the links below:

extra wide swingarm kit for v rod

extra wide swingarm kit for v rod

extra wide swingarm kit for v rod

250 tire swingarm for harley v rodextra wide swingarm kit for v rod

extra wide swingarm kit for v rod

Blog Comments

Hi these extra wide swingarm would allow me to maintain everything else stock (except for he new 280 tires and wheels of course) ?

Will it work with the stealth body kit?

Thank you for your interest in Eurocomponents’ swingarms for V-Rod’s.

Yes, but to fit a 280 tire on your stock V Rod you will need to use also a wider fender.

Yes, you can use our Extra Wide Swingarm Kit for V-Rod in conjunction with our Stealth Body Kit for V Rods, no problem.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

I’ve retro-fitted a 2002 V-Rod with a wide swing arm (2007 V-Rod) and now I need a rear fender assembly with lights and everything to make it look right, what you have that’ll help me out? What are your hours?
Mark
248 635-7353

Thank you for your interest in Eurocomponents’ parts for V-Rod’s.

Please check out our Extra Wide Rear Fender for V Rod

We are open Mon-Fri from 9am to 6pm.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Hi. Will this also fir a 2006 Streeet Rod?

Thank you for your interest in Eurocomponents’ swingarm kit for V Rods.

No, this swingarm model fits only on 2002-05 V-Rod models.

We have available this other swingarm model, which can fit your 2006 Streeet Rod:
https://www.custom-motorcycle-parts.com/eurocomponents-custom-motorcycles-news/billet-aluminum-swingarm-kit-for-v-rod-for-up-to-300-tires/

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Hello,

Do you have wide swingarm or Swingarm kit for VRSCF Muscle 2013?

Rgds
Philippe

Thank you for your interest in Eurocomponents’ swingarm kit for V Rods.

No, this swingarm fits only on 2002-05 V-Rod models.

We have available this other swingarm model, which can fit your 2013 Harley VRSCF Muscle:
https://www.custom-motorcycle-parts.com/eurocomponents-custom-motorcycles-news/billet-aluminum-swingarm-kit-for-v-rod-for-up-to-300-tires/

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Can you email me info on this. Do you have a full kit for sale for a 2005 vrod?

Thanks

Thank you for your interest in Eurocomponents swingarms for V-Rod’s.

For more info and mounting instructions just click on the BUY NOW link above the pictures.
We sell swingarms, wheels and pulleys separately, since we offer different options; just pick what you prefer and I can email you a quote.

This particular swingarm is just for earlier models: installation on 2005 models will require mounting of a 2004 or earlier stock pivot tube, tapered roller bearings, caliper and caliper bracket (or aftermarket brake for up to 2004 models).

All other swingarm models we offer are available for all V-Rod years / models.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Hello. I have a 2005 vrod and im thinking change de rear tyre (180) to a 240. Can you tell me all the parts that i need with the prices? and do you ship to Portugal?

Best Regards,

Ricardo

Thank you for your interest in Eurocomponents’ parts for V-Rod’s.

In order to fit a 240 tire in the back of your V Rod, you will need:
– wider swingarm
– front offset pulley
– 18×8.5 or 18×9 rear wheel
– narrower rear pulley
– narrower belt
– wider rear fender

Since we offer several different options, please check our website for prices. Otherwise please let us know the parts you like and the finish you prefer and we will email you a quote. We do not sell tires or belts, which you would need to source somewhere else.

Yes, we can ship to Portugal via UPS or DHL.
Please note all Int’l orders must be pre-paid via bank wire transfer (no Int’l credit cards or PayPal accepted).

Please let us know if we can be of any help.
Best regards.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Hi
Can you please give me a quote for a complete kit for a 240 conversion for a 2005 Vrscb v rod please.
Also if you can include postage to australia .
Thanks

Hello Lorenzo, Are you sure that this Swingarm kit, is not working with the 2006 V.rod version VRSCA? Thank you.

Thank you for your interest in Eurocomponents’ parts for V-Rod’s.

Yes, we are sure.
All other swingarm styles can fit your 2006 V Rod VRSCA no problem.

Please let us know if we can be of any help.
Best regards.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Thank you for your interest in Eurocomponents’ parts for V-Rod’s.

Please specify swingarm style and wheel style + finish you prefer so we can give you a quote.

Please let us know if we can be of any help.
Best regards.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

I need a swingarm which will fit in my Harley V.rod VRSCA (2006), to change from 180 to 280/300.. Then we will see the wheels..

Thank you.

Marcos.

These swingarms can fit a 280/300 tire on your 2006 Harley VRSCA (prices are listed on the pages for all different finishes):

Classic Swingarm Kit for V Rod’s for Up to 330 Tires
Cut-Out Swingarm Kit for V-Rods for Up to 330 Tires
Saber Swingarm Kit for V-Rods for Up to 330 Tires
Billet Aluminum Swingarm Kit for V-Rod for up to 300 Tires

Please let us know if we can be of any help.
Best regards.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Hi
I’m very interested in this swingarm for my 2004 VRSCA. I currently have the stock everything, but taking the fender off and lowering the bike with slammer shocks. Wanted to know what do I need to order besides the swing arm, the pully, wheel, and tire?

Thank you!
S

Thank you for your interest in Eurocomponents’ swingarms for V-Rod’s.

Besides what you mentioned, you will need also to replace the front pulley with an offset one:
https://www.custom-motorcycle-parts.com/parts/parts-v-rods/pulley-v-rod/front-offset-pulley-for-v-rod/

Please let us know if we can be of any help.
Best regards.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

https://www.custom-motorcycle-parts.com/product/swingarm-kit-extra-wide-for-v-rods-2002-05-polished/

Hi
I have an HD V-rod 2003
I want to buy this swing arm and a brake calipter from you (brake caliper I do not see in your catalog. Can you help me?) The rest of the necessary parts I had intended to buy from Rick’s. Do you have any additional information I should know about?
Do you have approval papers for these parts for approval in Norway?

Robert Santiago

Thank you for your interest in Eurocomponents’ swingarms for V-Rod’s.

Sorry, but we do not sell rear brake calipers for V-Rod’s.

The swingarm was TUV approved in Europe, but we no longer have the TUV documentation to supply.

Please let us know if we can be of any help.
Best regards.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Hello again
I forgot to ask you if the polished swingarm is the type for juse of brake and belt on the same side (drive side brake)?

Is the swingarm one size fits all or can I order for max 280?
V-rod 2003

Robert Santiago

Thank you for your interest in Eurocomponents’ swingarms for V-Rod’s.

No, this swingarm is not set up for drive side brake.
You may be able to modify it and fit a drive side brake, but we do not offer it that way.

Yes, the same swingarm fits 240, 250 or 280 tires.

Please let us know if we can be of any help.
Best regards.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Hello, i currently own a 2004 vrod totally stock. I am planning on customizong ecerything (wide tire, new body, new lights, handlebsr, etc. This will happen in the course of a year, the thing i need is a list with all the parts i need to buy including prices. I plan on buying all stuff from you monthly so i can finish the project in a year. I need to know the complete budget i need for this project. Thank you!

Thank you for your interest in Eurocomponents’ parts for V-Rod’s.

Please take a look at the following link and email us a list of the parts you are interested in:
https://www.custom-motorcycle-parts.com/category/parts/parts-v-rods/

For example, we have several different styles of swingarms, so we would need to know which style you like and which finish you prefer (polished or black). We will then be able to send you a quote.

Thank you.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

[…] world, the 280 Metzeler, and started taking the bike apart. The very first step was to engineer a new swingarm that would accommodate 280 and its 10.5-inch wheel. Once that was done, they came up with an offset […]

[…] ghost flames.  We also contacted Lorenzo of Eurocomponents in Daytona, Florida, to get their new 250 rear end kit.  The Eurocomponents kit comes with everything you need to make your V-Rod the nastiest thing on […]

[…] ghost flames.  We also contacted Lorenzo of Eurocomponents in Daytona, Florida, to get their new 250 rear end kit.  The Eurocomponents kit comes with everything you need to make your V-Rod the nastiest thing on […]

[…] top speed of close to 150 mph right out of the box.  German frame manufacturer UHS came up with a wider swingarm to fit the intended Metzeler 240 tire wrapped around an 18-inch Hyspeed rear wheel that’s […]

Hi, I’d like to order this swingarm kit for 2004 VRSCB, what additional parts i need to order to finish this transition to 300mm wheel?

Thank you for your interest in Eurocomponents’ parts for V-Rod’s.

This particular swingarm will allow you to mount up to a 280 tire on an 18×10.5 rim.
If you want to mount a 300 tire you would need to pick one of the other swingarms we offer.

For the installation you would need also:
– front offset pulley
– 18×10.5 wheel
– narrower rear pulley
– 3/4″ belt (cut your own or get one from a Harley dealer)
– tire
– wider rear fender

Thank you.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

I have a 2003 vrod with 240rear and the wider swing arm do i need offset front pully and offset rear pully .and will i need a small belt or will factory one fit

Thank you for your interest in Eurocomponents’ parts for V-Rod’s.

Yes, you also need a 1-1/8″ (29mm) belt (you can cut yours or buy a new one), a 72 teeth rear pulley for 1-1/8″ belt and an offset front pulley.

You can see the 72 teeth rear pulleys for 1-1/8″ belt we offer on this page:
https://www.custom-motorcycle-parts.com/category/parts/parts-v-rods/

You can the front offset pulley at this link:
https://www.custom-motorcycle-parts.com/parts/parts-v-rods/pulley-v-rod/front-offset-pulley-for-v-rod/

Thank you.

Lorenzo
………………………………….
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.instagram.com/custom_motorcycle_parts/
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

I have a 2005 Harley Davidson cvo v-rod VRSCSE I would like to go to a 240 rear tire could you give me a list of what I need and all parts that are available need to be polished or chrome and could you give me a quote and about how long it will take to get parts thank you. Shannon Edwards

Shannon,

Thank you for your interest in Eurocomponents’ parts for V-Rod’s.

For detailed info on a 240 tire conversion for your 2005 VRSCSE Harley Davidson CVO V-Rod, please check the following page on our website:

https://www.custom-motorcycle-parts.com/parts/parts-v-rods/parts-needed-for-v-rod-240-250-tire-conversion/

Please let us know if we can be of further help.
Thank you.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Add a comment

*Please complete all fields correctly

Related Parts

300 tire swingarm conversion kit for 2018-up milwaukee eight FLFBS fat boy’s and FXBRS breakout’s
3D Cobra Swingarm for 240 / 250 / 260 Tires for Milwaukee Eight Fat Boy’s, Breakout’s and FXDR’s
3D Cobra Swingarm and Primary Offset for 260 Tires for 2008-17 Harley-Davidson Twin Cam Softail’s, Rocker’s, Breakout’s and CVO Springer’s