Super Smooth motorcycle switch clamps are available with one or two buttons and are made for custom Harley Davidson motorcycles (HD), bobbers, custom choppers, and most custom bikes using 1” diameter handlebars. These motorcycle switch clamps are ideal for discreet operation of starting, horn, turn signals or hi/low beam (with our Motorcycle Switch Relay), while keeping your custom chopper looking clean, shiny, smooth and uncluttered.
They can be used in conjunction with our:
For more pictures of the installed product please click on the links below:
Just wondering do you ship these items to Australia?
Thank you for your interest in Eurocomponents’ motorcycle products.
Yes no problem, we ship to Australia.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Hello!
I was wondering.. what size could the inner diameter be?
Hello,
These are designed to fit on 1″ diameter handlebars.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Do you have three or four buttons switch clamps to apply to honda GL1800 2005?
Thank you for your interest in Eurocomponents’ products.
Sorry, but these motorcycle switch clamps are only available in 1 or 2 buttons configuration.
You could get our Universal Motorcycle Push Buttons and mount them directly on your handlebars or on any flat or radiused surface of your motorcycle.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
good evening!congratulations for your job,i would like to know if you ship to brazil?thanks
Thank you for your interest in Eurocomponents’ custom motorcycle parts.
Yes sure, we ship to Brazil no problem.
We use USPS, UPS, FedEx or DHL.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Hi, can you supply these switches in gloss black,
cheers AL
Thank you for your interest in Eurocomponents’ motorcycle switch clamps.
Yes, we supply them also in black anodized finish.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Do you offer the two button switch clamps on Chrome?
Thank you for your interest in Eurocomponents’ motorcycle switch clamps.
No, Super Smooth Motorcycle Switch Clamps are available only polished or black anodized.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Dear sir,
we are interested in using these buttons on our bicycles. My questions are:
– could these be mounted on Ø22mm handlebar?
– what doest the single and the double button clamp cost?
– is there any minimum order quantity?
– is there any technical datasheet/drawing showing these clamps?
Thank you
Thank you for your interest in Eurocomponents’ motorcycle switch clamps.
Sorry, but our Super Smooth Motorcycle Switch Clamps are only for 1″ handlebars.
Just click on the BUY NOW button above the pictures to get pricing.
No minimum order quantity required.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
When using switches for turn signal, is it a momentary switch, how do you cancel the signal operation
Thank you for your interest in Eurocomponents’ switch clamps.
All of our switches are momentary switches.
The on/off function of the turn signals is controlled by your wiring system, as for the stock turn signals.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Hello
Wath material are they made of?
Best regards
Lars, Denmark
Thank you for your interest in Eurocomponents’ switch clamps.
The clamps are made out of billet aluminum, while the push buttons are made of stainless steel.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
how many blinkers can u put on one switch
Thank you for your interest in Eurocomponents’ motorcycle switch clamps.
Each push button can be set for the function you prefer.
You can have two buttons for turn signal operation on the same Super Smooth Switch Clamp.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
The price listing offers the 2 button switch in chrome and polished, but only mentions the matching single switch for purchase in polished. Is it possible to be the single switch in chrome to match the double?
Thank you for your interest in Eurocomponents’ motorcycle switch clamps.
We are currently trying to get away from the chrome finish on these switch clamps.
But if you need a single-button switch clamp in chrome we can get it done, no problem.
Price would be identical to the black anodized single-button switch clamp.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Can you please send me the email address so I can place an order for the switches and what form of payment does your company except? Thanks
Hello,
You can email us at:
info@eurocomponentsusa.com
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Gidday Lorenzo, can you tell me how deep the universal switches because l am using an internal throttle.Also how much for 6 and shipping to Australia. Cheers Mate
Thank you for your interest in Eurocomponents’ Universal Push Buttons.
Sorry for the later reply, but we did not get some comment notifications from the website…
The part that goes inside the handlebars is approximately 0.30″.
Universal Stainless Steel Push Buttons are $35.80 a piece and USPS Priority Mail shipping to Australia is $55.80
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Can I use this to start an 84 Honda VT500 ascot instead of its stock parts
Thank you for your interest in Eurocomponents’ motorcycle switch clamps.
As long as you have 1″ handlebars, our Super Smooth Motorcycle Switch Clamps can fit and work no problem.
You will also need to solder the wires to your stock wiring.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
[…] This Motorcycle Switch Relay converts our momentary switch buttons in ON/OFF buttons. This custom motorcycle relay is made for custom Harley Davidson motorcycles (HD), bobbers, custom choppers, and most custom bikes. It features a very nice billet aluminum housing. Our Motorcycle Switch Relay is ideal for our Universal Push Buttons and Super Smooth Motorcycle Switch Clamps. […]
What size are the terminals and what size do they accept?
There are no connectors at the end of the wires, you need to solder them to your wiring.
Wires are the same as used on stock Harleys.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
How do these 2 button switch clamps hold securely onto the handlebars? Set screw? Tension from screw?
Also, what is the width of the 2 button switch? I’m looking to use one in place of a performance machine 3 button switch set.
Thank you for your interest in Eurocomponents’ motorcycle switch clamps.
There is a set screw underneath the Super Smooth clamps that secures them in place.
Please let us know if we can be of further help.
Thank you.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Two button Super Smooth switch clamps are 1-1/8″ wide.
Please let us know if we can be of further help.
Thank you.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Is there delivery in india??
Thank you for your interest in Eurocomponents’ motorcycle switch clamps.
Yes, we can ship to India via UPS or USPS Priority Mail.
Please note all International orders must be pre-paid via bank wire transfer.
Please let us know if we can be of further help.
Regards.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Hi there,
Do you still have the 2 buttons? Do you mind to ship to Jakarta (Indonesia)?
Regards.
Andy
Thank you for your interest in Eurocomponents’ motorcycle switch clamps.
Yes, we still have the 2-button switch housings.
No problem to ship to Jakarta (Indonesia).
Please note all International orders must be pre-paid via bank wire transfer.
Please let us know if we can be of further help.
Regards.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
need switch for air shock compress / dump valve. is this a always open, momentary closed switch? and
can it be wired externally?
Thank you for your interest in Eurocomponents’ motorcycle switch clamps.
Yes, Super Smooth Motorcycle Switch Clamps feature momentary switches.
I guess they could be wired externally, but you would need to drill the handlebars all the way (twice) and also the clamp on the opposite side.
Not sure why you would want to do this and not run the wires inside the bars…
Please let us know if we can be of further help.
Regards.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Hi, do you have a version for 7/8 handlebars?
Thank you for your interest in Eurocomponents’ motorcycle switch clamps.
Sorry, but Super Smooth Motorcycle Switch Clamps are available only for 1″ handlebars.
Please let us know if we can be of further help.
Regards.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
So, if I buy a two button switch, one button for hi/ low headlight and one for turn signal? Do they come with mounting instructions as far as hole in handle bar location? Thanks
Thank you for your interest in Eurocomponents’ motorcycle switch clamps.
These are momentary switches, so for the hi-low beam function you will need to use a relay (ours or any other one).
There are no instructions about where to drill the holes on the bars, this is something you need to figure out yourself test fitting the clamps on your bars.
Please let us know if we can be of further help.
Regards.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
You didn’t answer my question in regards to the two button switch. Can one button be used for hi lo headlight and the other button used for turn signals? Thanks DOUG Mauer
These are momentary switches, so for the hi-low beam function you will need to use a relay (ours or any other one).
They can be used for turn signals as well. The amount of time the blinkers will stay on is dictated by your wiring harness. You will need two buttons for the turn signals (one for the left side, the other for the right side).
Please let us know if we can be of further help.
Regards.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
[…] CAN-BUS Switchbox works great with our Mini Switch Housings, Super Smooth Motorcycle Switch Clamps, Universal Push Buttons, Micro Digital Motorcycle Speedo, Vintage Mini Motorcycle Speedo, Speedster […]