Universal Push Buttons

 

This little stainless steel push button switch comes with a special radius shaped spacer to allow direct mounting on all 1” handlebars. Of course you can also install this switch on flat surfaces, if you do not use the radius shaped spacer provided.

This is the cleanest solution you can find on the market and is ideal for discreet operation of starting, kill, horn, turn signals and hi/low beam (with our Motorcycle Switch Relay), while keeping your custom bike looking clean, shiny, smooth and uncluttered.

Switch is less than 1/2″ in diameter and sticks only 1/4″ above the handlebar surface.

Installation is very easy: drill the handlebars with a 9/32 drill bit (.2813 decimal inches), then use an M8x1.0 tap. If you have troubles finding a metric tap, you can use a 5/16-24 tap, which is the closest to the metric one.

Made out of stainless steel for great look and durability, switches are available in polished, black or gold finish. Each switch comes with two 20″ wires installed.
Sold individually.

Universal Push Buttons can be used in conjunction with our:

For more pictures of the installed product please click on the links below:

 

universal push buttonsuniversal push buttonsuniversal push buttonsmotorcycle push button polished black goldUniversal Push Buttons

universal push buttonsuniversal push buttons

Blog Comments

Is the price that is shown for this item for 1 or 2 of these buttons?

Hello,

They are sold individually.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Hello, I notice these are for 1″ bars, do you make, or will these fit, on 7/8″ bars?

Thank you for your interest in Eurocomponents’ motorcycle products.

Yes, our stainless steel universal push buttons can fit also 7/8″ motorcycle handlebars no problem.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Good night, i`m brazilian, my english is bad (sory). haw much 1 buttons or 10 buttons or more? Brazill fedex? thank you…

Thank you for your interest in Eurocomponents’ custom motorcycle parts.

Our universal motorcycle push buttons are $35.80 each.
USPS Priority Mail shipping with tracking number (6-10 business days) to Brazil for 1 or 10 universal push buttons is $39.15
UPS, FedEx or DHL are around double the USPS shipping price.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Is it possible to get these in black?

Thank you for your interest in Eurocomponents Universal Push Buttons.

Sorry, but our Universal Push Buttons are available only in polished stainless steel finish (not black).

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

How do the buttons operate? Do they stay on as long as you hold the button, or is it one push to turn on and a second push to turn off?

Thank you for your interest in Eurocomponents Motorcycle Push Buttons.

All of our motorcycle push buttons are momentary switches (they stay on as long as you hold the button).
To convert them to ON/OFF switches you need to use our Motorcycle Switch Relay.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

And how does the high low headlight work with the these buttons? I know about the relay but just wanted clarification on the the high low function.

Thank you for your interest in Eurocomponents Stainless Steel Push Buttons.

Once you have installed our Motorcycle Switch Relay the button will work as an ON/OFF button. Basically you push the button once and the high-beam will turn on, you push it again and it will go back to low beam.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Can the pushbuttons be used for Harley cruise control?

Hi, do you ship this to Portugal?

Thank you for your interest in Eurocomponents’ Universal Push Buttons.
Sorry for the later reply, but we did not get some comment notifications from the website…

We never tried using the Universal Push Buttons for cruise control function, but cannot think of any reason why they shouldn’t work for that purpose.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Thank you for your interest in Eurocomponents’ Universal Push Buttons.

Yes, we can ship to Portugal either via UPS or USPS Priority Mail.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Hi there. Are these only available as momentary switch or are they also available as latched switches?

Thank you for your interest in Eurocomponents’ universal push buttons.

Our motorcycle switches are momentary.
To convert them to ON/OFF switches you will need our relay, which is sold separately:
https://www.custom-motorcycle-parts.com/parts/motorcycle-hand-controls-parts/motorcycle-switch-relay/

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Hi, can these switches be used as the start/stop switch?

Thank you for your interest in Eurocomponents’ universal push buttons.

Yes, you can use these stainless steel push buttons for ignition.
To kill the bike, you simply turn the key.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

How do I put these on my handlebar? Do I have to grill then insert them? If so, how do I tighten the nut from the inside of the handlebar.

Thank you

Thank you for your interest in Eurocomponents’ universal push buttons.

Yes, you need to drill and tap the handlebars.

Drill the handlebars with a 9/32″ drill bit (.2813 decimal inches), then use an M8x1.0 tap. If you have troubles finding a metric tap, you can use a 5/16-24 tap, which is the closest to the metric one.

You do not use the nut when mounting them on bars, but just put a drop of blue Loctite on the threads.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

This looks like the cleanest it gets, but just wondering about one thing.

When you insert the wires inside the handlebars then starting to screw in the push button, isn’t there a risk of having the wires twisted then cut off from the button.

thank you

Thank you for your interest in Eurocomponents’ universal push buttons.

You need to screw in the push button prior to soldering the wires.
In this way you can straighten the wires from where they come out from the bars.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Hi, if I want to use each switch as am on off switch, do I need a relay for each switch, or will one relay do the job?
Thanks, John

Thank you for your interest in Eurocomponents’ universal push buttons.

You would need one relay for each switch.
Normally the relay is needed only for the high beam function.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

I don’t understand how to screw in the button prior to soldering.

How do you solder the wires inside the handlebars? It won’t be any room for the iron to get in there.

Do you have any pictures or videos that demonstrate this process?
I am interested in these things.

Thank you

You would need to get the wires outside the bars, solder them and then push the extra wiring inside the bars.

In any case I am sure a lot of customers solder the wires prior to screwing in the buttons and we never heard back from anybody about wires being cut off from buttons.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

I was wondering if they are weather proof and how well have they held up so far?

Thank you for your interest in Eurocomponents’ universal push buttons.

Yes, they are weather proof.
We have been selling the universal push buttons for the past 12 years and never had problems due to water getting on them.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Cómo eu faço pra adquirir estes produtos

Thank you for your interest in Eurocomponents’ universal push buttons.

All Int’l orders must be placed via email to info@eurocomponentsusa.com
Please note all Int’l orders must be pre-paid via bank wire transfer (no Int’l credit cards or PayPal accepted).

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

How long are the leads? Do I need to add wiring to fish it through 16″ apes? Thanks

Hello.

Thank you for your interest in Eurocomponents’ Universal Push Buttons.

Wires are approx. 20″ long.

Please let us know if we can be of further help.
Thank you.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts

Add a comment

*Please complete all fields correctly

Related Parts

Octane Headlight Fairing for 2021-Up Sportster S RH1250S Model
Custom Windshield Fairing Kit for 2021-Up Sportster S
Custom Front Fender for 2021-Up Sportster S RH1250S Model