Comments on: Super Smooth Motorcycle Switch Clamps

By: CAN-BUS Switchbox – Custom Motorcycle Parts, Bobber Parts, Chopper Motorcycle Parts by Eurocomponents

Sun, 28 Apr 2019 16:29:40 +0000

[…] CAN-BUS Switchbox works great with our Mini Switch Housings, Super Smooth Motorcycle Switch Clamps, Universal Push Buttons, Micro Digital Motorcycle Speedo, Vintage Mini Motorcycle Speedo, Speedster […]

By: Lorenzo Da Madice

Lorenzo Da Madice — Tue, 23 Jan 2018 18:15:27 +0000

In reply to Doug Mauer.

These are momentary switches, so for the hi-low beam function you will need to use a relay (ours or any other one).
They can be used for turn signals as well. The amount of time the blinkers will stay on is dictated by your wiring harness. You will need two buttons for the turn signals (one for the left side, the other for the right side).

Please let us know if we can be of further help.
Regards.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

By: Doug Mauer

Doug Mauer — Tue, 23 Jan 2018 16:51:57 +0000

You didn’t answer my question in regards to the two button switch. Can one button be used for hi lo headlight and the other button used for turn signals? Thanks DOUG Mauer

By: Lorenzo Da Madice

Lorenzo Da Madice — Mon, 15 Jan 2018 12:28:16 +0000

In reply to Doug Mauer.

Thank you for your interest in Eurocomponents’ motorcycle switch clamps.

These are momentary switches, so for the hi-low beam function you will need to use a relay (ours or any other one).
There are no instructions about where to drill the holes on the bars, this is something you need to figure out yourself test fitting the clamps on your bars.

Please let us know if we can be of further help.
Regards.

By: Doug Mauer

Doug Mauer — Sun, 14 Jan 2018 19:46:21 +0000

So, if I buy a two button switch, one button for hi/ low headlight and one for turn signal? Do they come with mounting instructions as far as hole in handle bar location? Thanks

By: Lorenzo Da Madice

Lorenzo Da Madice — Mon, 16 Oct 2017 09:51:14 +0000

In reply to Fernando Agostinelli.

Thank you for your interest in Eurocomponents’ motorcycle switch clamps.

Sorry, but Super Smooth Motorcycle Switch Clamps are available only for 1″ handlebars.

Please let us know if we can be of further help.
Regards.

By: Fernando Agostinelli

Fernando Agostinelli — Sun, 15 Oct 2017 06:41:02 +0000

Hi, do you have a version for 7/8 handlebars?

By: Lorenzo Da Madice

Lorenzo Da Madice — Sat, 02 Sep 2017 16:52:04 +0000

In reply to marvin wilson.

Thank you for your interest in Eurocomponents’ motorcycle switch clamps.

Yes, Super Smooth Motorcycle Switch Clamps feature momentary switches.

I guess they could be wired externally, but you would need to drill the handlebars all the way (twice) and also the clamp on the opposite side.
Not sure why you would want to do this and not run the wires inside the bars…

Please let us know if we can be of further help.
Regards.

By: marvin wilson

marvin wilson — Sat, 02 Sep 2017 03:33:52 +0000

need switch for air shock compress / dump valve. is this a always open, momentary closed switch? and
can it be wired externally?

By: Lorenzo Da Madice

Lorenzo Da Madice — Tue, 25 Jul 2017 16:39:48 +0000

In reply to Andy.

Thank you for your interest in Eurocomponents’ motorcycle switch clamps.

Yes, we still have the 2-button switch housings.

No problem to ship to Jakarta (Indonesia).
Please note all International orders must be pre-paid via bank wire transfer.

Please let us know if we can be of further help.
Regards.