Our Vintage Mini Motorcycle Speedo’s feature 1.90 inches (48mm) diameter for a minimalistic look. Speed can be set in either miles per hour or km/h. If speed goes over 200, it will be displayed on the LED display. The LED dispay in the middle of the motorcycle speedo offers the following functions: total distance (odometer), maximum speed, on-board voltage, time. There are also four colored LED’s for oil pressure (red), neutral (green), high beam (blue) and turn signals (yellow). Our Vintage Mini Motorcycle Speedo’s can fit in our De Luxe Motorcycle Speedo Housing, Ring Motorcycle Speedo Housing and in our Alcatraz Motorcycle Speedo Housing. Speedo housings are sold separately.
[…] Vintage Mini Motorcycle Speedo […]
[…] Vintage Mini Motorcycle Speedo […]
[…] Vintage Mini Motorcycle Speedo […]
Would this speedo work on a ’75 r90/6? The ratio posted on the current one is w=1.144
Thank you for your interest in Eurocomponents’ Vintage Motorcycle Speedometer.
Sorry, but we never tried installing it on your model.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Does this speedometer use the speed sensor, or is it cable driven?
Thank you for your interest in Eurocomponents’ mini motorcycle speedometers.
Our Vintage Mini Motorcycle Speedo uses the speed sensor.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Will the “vintage mini speedo” work on a 2013 Victory?
Thank you for your interest in Eurocomponents’ mini motorcycle speedometers.
We do not have specific transmission plugs for Victory’s, but using supplied components you can build your signal on the front wheel..
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Hi,
Can this be fitted to a Harley Hardtail 1200XL S?
Thanks,
Dave
Also, how long will it take to send to Ireland?
Thanks,
Dave
Thank you for your interest in Eurocomponents’ mini motorcycle speedometers.
Yes, our Vintage Mini Motorcycle Speedo can fit your Harley Hardtail 1200XLS, no problem.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Work for a 600vlx?
Thank you for your interest in Eurocomponents’ mini motorcycle speedometers.
Yes, our Vintage Mini Motorcycle Speedo can fit your 600 VLX.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Hello,
I’m going on a bobber project with my honda shadow vt750 aero. the speedometer (including digital odometer, idle and turn signal leds) does not measure by the wheel, it’s digital. I want to know if I can use this speedometer without addition or just with digital adapter.
Thank you in advance.
Teke
Thank you for your interest in Eurocomponents’ mini motorcycle speedometers.
Yes, our Vintage Mini Motorcycle Speedo can fit your Honda Shadow without the need of a digital adapter.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Hi, will this Vintage mini speedometer fit Roadstar -99
Kindly Johan
Thank you for your interest in Eurocomponents’ mini motorcycle speedometers.
Yes, our Vintage Mini Motorcycle Speedo can fit your 1999 Yamaha Roadstar, no problem.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Thank you very much for your response. Can I set the recent odometer value on your speedometer so it continues from the latest total KM value? and does it have a backlight for night-ride?
Yes, of course our Mini Speedometers are backlit.
We will email you a User Manual, so you can see all the features of our speedos.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Hi , will this Speedo work on 2013 triumph Bonneville mag wheel. And is thereany aadditional parts required to make it work. Thanks
Thank you for your interest in Eurocomponents’ mini motorcycle speedometers.
Yes, it can fit your 2013 Triumph Bonneville with mag wheel, since the signal is picked up at the transmission.
I will email you mounting instructions.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
I have a 1968 flatside shovelhead project. Will your vintage mini speedo work for this application? If so what other parts are needed (Sensor adaptor? 1968 has a tranny speedo drive) thanks for any help
Thank you for your interest in Eurocomponents’ mini motorcycle speedometers.
Yes, it should fit also on your 1968 Shovelhead.
I will email you mounting instructions, so can see what you need for installation.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Hi..
Looking for pricing and want to install this speedo on a Honda cx500 custom.. think this speedo will work on a cx500?
Thank you for your interest in Eurocomponents’ mini motorcycle speedometers.
Our Vintage Mini Motorcycle Speedo is $472.50
Yes, it can fit on your Honda CX500 Custom.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Will the Vintage Mini Motorcycle Speedo fit 06 Hd Streetbob.
Thank you for your interest in Eurocomponents’ mini motorcycle speedometers.
Yes, the Vintage Mini Motorcycle Speedo can fit on your Harley Streetbob.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Will the vintage mini suit my replica pan motor
Thank you for your interest in Eurocomponents’ mini motorcycle speedometers.
As long as your motorcycle has the signal on the transmission, it will fit.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
I have an ’11 yamaha stryker. Can you tell me if this speedo would be compatible with the stock speed sensor?
And if so can i get some additional pictures sent to me please.
Thank you
Thank you for your interest in Eurocomponents’ mini motorcycle speedometers.
Yes, our Vintage Mini Motorcycle Speedo can fit your 2011 Yamaha Stryker, no problem.
You can find more pictures of the Vintage Speedometer installed inside our housings at the following link:
Ring Motorcycle Speedo Housing
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Hello
I have a Kawasaki Meanstreak vn1500 -03
will the Vintage Mini Motorcycle Speedo, fitt and work. and do you ship to sweden.
Best regards
//mike
Thank you for your interest in Eurocomponents’ mini motorcycle speedometers.
As long as you a signal pick up on your transmission for electronic speedos it is no problem.
Yes we can ship to Sweden via UPS or DHL.
Please let us know if we can be of further help.
Regards.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts