De Luxe Retro motorcycle hand controls are direct replacements for the stock Harley levers or can be installed on any custom chopper, bobber and most custom motorcycles.
These retro looking chopper motorcycle hand controls feature forged aluminum body and clamp, forged brass finned master cylinder lid and forged brass levers for a true old school look!
These motorcycle hand controls feature a very distinctive design and perfectly match our:
- De Luxe Brass Push Buttons
- Knurled Brass Motorcycle Grips
- Vintage Motorcycle Grips
- De Luxe Brass Motorcycle Risers
- Vintage Custom Forward Controls
- Vintage Custom Forward Controls with Round Holes
- Vintage Motorcycle Mid Controls with Brake and Hydraulic Clutch Master Cylinders
- Nostalgia Carburetor Cover
- Male Vintage Motorcycle Pegs
De Luxe Retro custom brakes have a 9/16” bore and can be used with single two piston brake caliper, four piston brake caliper, six piston brake caliper or dual two piston brake calipers. Available for cable clutches and hydraulic clutches. Brake control and clutch control are sold separately.
For more pictures of the installed product please click on the links below:
hello, i was wondering what the return policy is on these? also what able and caliper and rotor are needed? do you sell those also? i would like to put them on my 69 triumph. but not sure if the cable and disc set up i have will be comparable or if i would need to purchase new.
Thank you for your interest in Eurocomponents’ motorcycle products.
Please check our Terms and Conditions to see our return policy.
Our Motorcycle Hand Controls are designed for Harley application. If your ’69 Triumph can take Harley type cables you should not have any problems.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Hello . i have the following question.
Do you have also a hydraulic clutch hand control of these luxe retro hand controls. because i can,t find it .
And i need a luxe retro hydraulic handle for my 2 billet mini 6 brakes .
Can you help me ,
Best regards Joren van Deursen
Thank you for your interest in Eurocomponents’ motorcycle products.
Sorry, but at the moment we do not make a Retro De Luxe hydraulic clutch master cylinder, only cable clutch is available.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
before i bought these parts for my bike i wanted to know if they will work on a 2009 harley davidson night train if so then they will become an added and welcome addition to my bike
thanks
Thank you for your interest in Eurocomponents’ custom motorycle parts.
Yes our De Luxe Retro motorcycle hand controls can fit your 2009 Harley-Davidson Night Train no problem.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
[…] housing is for all Harley Davidson models from 1974 to present and looks great combined with our De Luxe Retro Motorcycle Hand Controls Aluminum and Brass, Vintage Grips, Super Smooth Grips, Chopper Grips and De Luxe Hand […]
Can i buy just the clutch controll or do you only sell in sets?
Thank you for your interest in Eurocomponents’ custom motorycle hand controls.
Yes our De Luxe Retro motorcycle hand controls are sold separately.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
[…] risers feature 2.5 inches rise and 1 inch pullback. Look great alone or combined with our De Luxe Retro Motorcycle Hand Controls Aluminum and Brass. Sold in […]
[…] looking clean, shiny, smooth and uncluttered. De Luxe Brass Push Buttons perfectly match our De Luxe Retro Motorcycle Hand Controls Aluminum and Brass. Screws included, requires drilling into your handlebars to mount. Sold […]
[…] Alcatraz Motorcycle Headights, Alcatraz Motorcycle Speedo Housing, Ring Motorcycle Speedo Housing, De Luxe Retro Motorcycle Hand Controls Aluminum and Brass and De Luxe Retro Cable Motorcycle Hand Controls Aluminum and Brass. Taillight included. Mounting […]
[…] Motorcycle Tail Lights, Alcatraz Motorcycle Speedo Housing, Ring Motorcycle Speedo Housing, De Luxe Retro Motorcycle Hand Controls Aluminum and Brass and De Luxe Retro Cable Motorcycle Hand Controls Aluminum and Brass. This brass […]
do the de luxe hand controls have a brake or clutch sensor in them ? maybe a dumb question?
Thank you for your interest in Eurocomponents’ Brass Hand Controls.
In order to have clean designs none of our motorcycle hand controls come with a brake light switch.
If you need one, you can use an inline brake switch on your brake line.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
[…] design that perfectly matches our Male Vintage Motorcycle Pegs, Vintage Motorcycle Grips and De Luxe Brass Motorcycle Hand Controls. Shifter side does not have attachment for stock kickstand, so our Universal Kickstand must be […]
[…] design that perfectly matches our Vintage Motorcycle Foot Pegs, Vintage Motorcycle Grips and De Luxe Brass Motorcycle Hand Controls. Shifter side does not have attachment for stock kickstand, so either our Universal Motorcycle […]
[…] This chopper kickstand is machined out of brass and features an internal spring for a super clean look. It can be welded to all frames and will look great on custom choppers, bobbers and most custom motorcycles featuring an old school look. This custom motorcycle kickstand perfectly matches with our Vintage Custom Forward Controls, Vintage Custom Forward Controls with Round Holes, Vintage Motorcycle Foot Pegs, Brass Motorcycle Pegs, Vintage Motorcycle Grips, Brass Motorcycle Grips and De Luxe Retro Brass Motorcycle Hand Controls. […]
[…] design that perfectly matches our Vintage Motorcycle Pegs, Vintage Motorcycle Grips and De Luxe Brass Hand Controls. Kit includes billet brake master cylinder and hydraulic clutch master cylinder. Foot-operated […]
[…] are great for old school bobbers and custom choppers. They look great alone or combined with our De Luxe Brass Hand Controls and De Luxe Retro Cable Motorcycle Hand Controls Aluminum and Brass. Sold in […]
[…] De Luxe Brass Motorcycle Hand Controls […]
[…] De Luxe Brass Motorcycle Hand Controls […]
will these retro hand controls work with dimple bars,also do they come in black.Thank you
Thank you for your interest in Eurocomponents’ Brass Hand Controls.
Yes, our De Luxe Retro Motorcycle Hand Controls Aluminum and Brass can fit dimple bars no problem.
They are available in polished or satined finish, not black.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Hi 😉
These brass hand controls are super cool!
How do I order a set?
Thx,
Pete
http://www.fda-510k.com
Thank you for your interest in Eurocomponents’ Brass Hand Controls.
To place an order, just click on the BUY NOW link above the pictures and you will be forwarded to our webstore.
If you prefer you can call us during business hours at the number on my signature below, and we will happy to assist you.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
I love these controls. I have a 2011 Harley Crossbones, will these work as a direct bolt on if I intend to keep the stock electrical switch boxes? If not, any recommendations?
Thank you for your interest in Eurocomponents’ Brass Hand Controls.
Sorry, but we never tried installing these hand controls together with 2011 OEM switch housings.
They would probably fit, but we cannot tell for sure.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Will these controls work with my stock FLD switch housings? Thanks.
Thank you for your interest in Eurocomponents’ Brass Hand Controls.
Sorry, but we never tried installing these hand controls together with OEM switch housings.
Normally customers replace also the switch housings for a cleaner look.
They would probably fit, but we cannot tell for sure.
Please let us know if we can be of further help.
Thank you and have a good day.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
[…] De Luxe Retro Motorcycle Hand Controls Aluminum and Brass […]
Hi’
Would these hand controls fit a 2000 heritage softail
Thank you for your interest in Eurocomponents’ Brass Hand Controls.
Yes, any of our motorcycle hand controls can fit your 2000 Harley-Davidson Heritage Softail.
Please let us know if we can be of further help.
Thank you.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
[…] heights: 1.5″ and 2″ (ideal for Springer models). Look great alone or combined with our De Luxe Retro Motorcycle Brass Hand Controls and Retro Inverted Motorcycle Brass Hand Controls. Sold in […]
I’ve had the brass de lux hand controls for many years now and love them. Unfortunately, I now live in Germany where the rules are more strict. Do you have some sort of switch that I can run inline with the brake for the control to activate the brake light as well? Thanks, J.
Thank you for your interest in Eurocomponents’ Brass Hand Controls.
We do not sell it, but you should look for an inline brake switch.
They are kind of big and ugly, but maybe you can hide it somewhere.
You can usually find them on big catalogs, like Custom Chrome and Drag Specialties or also some sportbike catalogs.
Please let us know if we can be of further help.
Thank you.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts
Boa noite
Gostaria de saber se vocês fazem o envio desse produtos para o Brasil?
Thank you for your interest in Eurocomponents’ Brass Hand Controls.
Yes, we ship to Brazil via UPS or DHL.
Please note this website accepts only US / domestic orders.
All International orders must be placed via email to info@eurocomponentsusa.com
All International orders must be pre-paid via bank wire transfer.
Please let us know if we can be of further help.
Thank you.
Lorenzo
…………………………………………………………
Eurocomponents, Inc.
Phone +1 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts