Motorcycle Master Cylinder with Lever and Billet Reservoir

Throttle Assembly, Internal Throttle, Twist Clutch, etc. 8 Comments

This super-compact motorcycle master cylinder with lever and billet reservoir was specifically designed to be used in conjunction of our Weld On Motorcycle Hand Controls, De Luxe Retro Cable Motorcycle Hand Controls Aluminum and Brass and De Luxe Retro Cable Motorcycle Hand Controls All Aluminum, so they can be used as brake or hydraulic clutch motorcycle levers. Machined out of billet aluminum, this motorcycle master cylinder can be easily hidden on your custom chopper or bobber for a super-clean look. It can be welded under the seat, under the tank or in any other place hidden or not. This 9/16″ bore custom motorcycle master cylinder can be used with single two piston brake caliper, four piston brake caliper, six piston brake caliper or dual two piston brake calipers. Mounting bracket will need to be fabricated and welded to the desired location.

 

master cylinder with lever and billet reservoir for weld on hand controls

master cylinder with lever and billet reservoir for weld on hand controls

8 Responses to “Motorcycle Master Cylinder with Lever and Billet Reservoir”

  1. dean says:

    i was just wondering how much this item (14 Mar 2010
    Motorcycle Master Cylinder with Lever and Billet Reservoir) would cost with posting to the uk

  2. Lorenzo says:

    Thank you for your interest in Eurocomponents’ motorcycle products.

    Please click on the BUY NOW link after the product description to check prices for the different finishes.
    Shipping to the UK is $45.50

    Please let us know if we can be of further help.
    Thank you and have a good day.

    Lorenzo
    …………………………………………………………
    Eurocomponents, Inc.
    1368 North US 1 – Suite 402
    Ormond Beach, FL 32174 (USA)
    Phone 386-868-0696
    Fax 386-274-5733
    http://www.eurocomponentsusa.com

  3. leonardo says:

    hy I want to now .. can I use this part to make my bike clutch hydraulic i have internal clutch but its tto hard to twist so i thinks to use this system to make the clutch more smooth also how much w ship to miami dade .. or any dealer on dade area thks,,,,

  4. Lorenzo says:

    Thank you for your interest in Eurocomponents’ motorcycle products.

    Yes, you can use our custom motorcycle master cylinders to convert your cable clutch to an hydraulic clutch.
    We had several customers using them for this purpose.
    These are 9/16″ bore master cylinders. Please confirm with your clutch manufacturer that this bore size will be appropriate for your clutch.

    Please let us know if we can be of further help.
    Thank you and have a good day.

    Lorenzo
    …………………………………………………………
    Eurocomponents, Inc.
    1368 North US 1 – Suite 402
    Ormond Beach, FL 32174 (USA)
    Phone 386-868-0696
    Fax 386-274-5733
    http://www.eurocomponentsusa.com

  5. Brian Parmelee says:

    Looking to install a left handed twist front brake on my custom Harley….wanted to use your twist clutch and hidden m/c with resivoir…this should work right? What needs to be done for the cable from grip to m/c? Does a cable come with the grip assy?

  6. eurocomponents says:

    Thank you for your interest in Eurocomponents’ motorcycle products.

    Cables are not provided.

    You should use a 1.5mm (0.05”) / 2mm (0.07”) cable (like throttle cables) from our twist clutch device to the remote master cylinder. From the remote master cylinder to your hydraulic clutch cover use a regular clutch cable.
    The hydraulic clutch must have a 35mm piston (1.37” / 1,5”).

    Make sure you make as few as possible curves with the cables, because the more you do the harder will be the twisting of the grip.

    Please let us know if we can be of further help.
    Thank you and have a good day.

    Lorenzo
    …………………………………………………………
    Eurocomponents, Inc.
    1368 North US 1 – Suite 402
    Ormond Beach, FL 32174 (USA)
    Phone 386-236-1210
    Fax 386-236-1215
    http://www.eurocomponentsusa.com

  7. S.O.B Cycles says:

    What are the dimensions of the Motorcycle Master Cylinder with Lever and Billet Reservoir?

  8. eurocomponents says:

    Thank you for your interest in Eurocomponents’ motorcycle master cylinders.

    We will email you a schematic with dimensions.

    Please let us know if we can be of further help.
    Thank you and have a good day.

    Lorenzo
    …………………………………………………………
    Eurocomponents, Inc.
    1368 North US 1 – Suite 402
    Ormond Beach, FL 32174 (USA)
    Phone 386-868-0696
    Fax 386-274-5733
    http://www.eurocomponentsUSA.com

Leave a Reply

Currently you have JavaScript disabled. In order to post comments, please make sure JavaScript and Cookies are enabled, and reload the page. Click here for instructions on how to enable JavaScript in your browser.