Motorcycle Internal Twist Clutch Device for Left Side Grips

 

This motorcycle internal twist clutch device fits inside any 1″ motorcycle handlebars and the clutch cable will be routed inside the handlebars for a super-clean look. Our Motorcycle Internal Twist Clutch Device is identical to our Motorcycle Internal Throttle Device, but it features a reversed spiral, so it can be operated with your left side grip to pull a cable. The internal twist clutch must be used in conjunction with our Master Cylinder with Lever or Master Cylinder with Lever and Billet Reservoir. Our Internal Twist Clutch Device works perfectly with our 3D Internal Throttle Grips, Chopper Grips, Super Smooth Chrome Motorcycle GripsKnurled Brass Motorcycle Grips, Knurled Custom Motorcycle Grips and Vintage Motorcycle Grips.

► Internal twist clutch device – mounting instructions

For more pictures of the installed product please click on the links below:

internal twist clutch device for left side grips

Blog Comments

i have arthritis in my left hand. have a problem squeezing lever looking for reasonable alternative.

Thank you for your interest in Eurocomponents’ motorcycle internal twist clutch.

Yes, we had other customers with arthritis in the past that used our twist clutch device and were pretty happy.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

I have a deformity in my left hand that prevents me from using the lever-style clutch found on many bikes. I’m actually interested in purchasing a motorcycle for the first time (I have never ridden due to my disability) and am looking for alternatives to clutch levers.

Would these twist clutches work on super sport bikes such as the Yamaha R6/ Honda CBR 600RR?

Thank you for your interest in Eurocomponents’ motorcycle internal twist clutch.

We designed our internal twist clutch for Harley Davidson’s, which have pretty heavy clutches.
We never tried using it on sportbikes, so we cannot tell for sure, but it should work fine.

Please note that our internal twist clutch is for 1″ diameter handlebars, while most sportbikes have 7/8″ (22mm) handlebars.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

I lost the cable guide piece is it possible to buy that part sepperatly?

Yes, no problem.
Please give us call at your convenience.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Hi there. Calling from the UK. Could you please answer a couple of questions? My husband has a 1340 shovel – would this be suitable? Also, do you make them for 1 1/4″ bars? Looking forwards to your reply. Jen.

Thank you for your interest in Eurocomponents’ motorcycle internal twist clutch.

Yes, our twist clutch can fit on your Harley Shovel, no problem.
Normally 1-1/4″ handlebars step down to 1″ in the grips area, so also that should not be a problem.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

will this work on a v star 1100 classic

[…] could always try an internal twist grip clutch. Motorcycle Internal Twist Clutch Device for Left Side Grips I think Russell Mitchell from Exile Cycles has used something similar on a few of his bikes with […]

Thank you for your interest in Eurocomponents’ motorcycle internal twist clutch.

We never tried installing our twist clutch on a V Star 1100 Classic, but if you have 1″ diameter bars and 1″ diameter grips, we do not see why it should not fit.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

could you use this for a left handed throttle?

Thank you for your interest in Eurocomponents’ motorcycle internal twist clutch.

Yes, you can use it as a left hand internal throttle, no problem.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Just seeing if this requires a different cable to stock or any mods to the clutch? Evo Harley, 1988 Softail.
Thanks

Thank you for your interest in Eurocomponents’ motorcycle internal twist clutch.

The stock cable will not work with our twist clutch.
You would need to use a 1.5mm (0.05”) / 2mm (0.07”) cable (like a throttle cable).

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Hi guys

You say this needs to be used with your master cylinder, but what if your not using an hydraulic clutch!, how would it work then, has I’m guessing it would be very stiff

Thank you for your interest in Eurocomponents’ motorcycle internal twist clutch.

Yes, you are correct it would be too hard to twist without an hydraulic clutch.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Hi

can this be used on a 4 speed shovel without converting to a hydraulic clutch, the cable set yup requires some force to operate the clutch, will your internal spiral be able to provide the required force. O have read of peaple not being able to twist the grip hard enough to operate the clutch

Thank you for your interest in Eurocomponents’ motorcycle internal twist clutch.

We reccomend not using our motorcycle internal twist clutch with a cable clutch because it would be very hard to twist.
But we have had several customers using it with cable clutches…

For sure the best application is in conjunction with an hydraulic clutch and our Motorcycle Master Cylinder with Lever and Billet Reservoir.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Hello, I have a Suzuki Boulevard C90 1500, will the twist clutch work on it.

Thank you for your interest in Eurocomponents’ motorcycle internal twist clutch.

Sorry, but we never tried installing our twist clutch on a Suzuki Boulevard C90 1500.
It has been designed to work with Harley type clutches and we never had a chance to try it on other motorcycle brands.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Thanks for getting back with me, last question, is there a twist clutch system that will work on an Suzuki Boulevard C90 1500, will the twist clutch work on it.

Hello,

Sorry, but we are not aware of any twist clutch made for metric bikes in general.
Probably the Harley ones would work, but we never tried so we cannot tell for sure.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

Can the twist clutch work with a cable operated Honda VT750c 1999? The clutch handle is reasonably light but my wife’s fingers have no strength.Perhaps a throttle assist in palm of hand could be used to exert extra strength.If a diiferent diameter handle bar would be required the bike could be converted.

Would appreciateadvice.

Rob

Thank you for your interest in Eurocomponents’ motorcycle internal twist clutch.

Sorry, but we never tried installing our twist clutch on a 1999 Honda VT750c.
It has been designed to work with Harley type clutches and we never had a chance to try it on other motorcycle brands.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

I have a 2012 Harley Ultra Classic. My left hand has become too weak to squeeze the clutch. I also have heated grips which are controlled on the left side. I do not have a hydraulic clutch. Will your product work with this configuration?

Thank you for your interest in Eurocomponents’ motorcycle internal twist clutch.

Sorry, but our Twist Clutch cannot fit your configurtion.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

hi …. what kind of cable is needed …. do you have a part # that is used with you clutch grip …… I thought there is a easy pull set up to help the twist clutch..do you know anything about that …..thanks

Thank you for your interest in Eurocomponents’ motorcycle internal twist clutch.

There is no specific cable for the twist clutch device. Throttle cables are too small and regular clutch cables are too big.
There are on the market some aftermarket cables used for motorcycle brakes, which are in between regular throttle cables and regular clutch cables. We suggest to use the ones of about 2mm diameter, which can be easily routed through the handlebars but are also strong enough.

Yes, there are some devices that facilitate cable clutch pulling. A very good one is the Muller Power Clutch. You can find several on Google.

Please let us know if we can be of further help.
Regards.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
https://www.custom-motorcycle-parts.com
https://www.facebook.com/CustomMotorcycleParts
https://twitter.com/ChopperParts

[…] for up-shifting, one for downshifting.  On the clutch side, that lever has been replaced with a twist grip controlling a tiny master cylinder mounted inside the handlebar.  The brakes are operated with […]

Add a comment

*Please complete all fields correctly

Related Parts

De Luxe Brass Master Cylinder with Lever and Reservoir
Universal Fit Motorcycle Fluid Reservoir – Clear Plexiglass
Universal Fit Motorcycle Fluid Reservoir – Chrome Aluminum