Motorcycle Internal Throttle Assembly

Our motorcycle internal throttle assembly fits inside any 1″ motorcycle handlebars and the throttle cable will be routed inside the bars for a super-clean look. This motorcycle internal throttle accepts all grips designed for 1” handlebars and was made for custom Harley Davidson motorcycles (HD), bobbers, custom choppers, and most custom bikes. Our Internal Throttle Assembly works perfectly with our 3D Internal Throttle Grips, Chopper Grips, Super Smooth Chrome Motorcycle Grips, Knurled Brass Motorcycle Grips, Knurled Custom Motorcycle Grips and Vintage Motorcycle Grips.

 

internal throttle assembly

internal throttle assembly

Blog Comments

Will these work with a cb750 k4?

Thank you for your interest in Eurocomponents’ motorcycle internal throttle assembly.

We never tried to install it on a cb750 k4.
If you have 1″ diameter handlebars our motorcycle internal throttle assembly should fit no problem.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
Fax 386-274-5733
http://www.eurocomponentsusa.com

Hi,I have a honda cb250, and I have twin cable operated carburettors. Will these internal throttle assembly work, if I have a 1″ handle bar??.

Thank you for your interest in Eurocomponents’ motorcycle internal throttle assembly.

Sorry, but we never tried to install our internal throttle on a Honda CB250, so we have no idea if it can fit or not.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
Fax 386-274-5733
http://www.eurocomponentsusa.com

I like the product and I want to install it on my Victory Jackpot. What about the return cable or does the set up automatically return the throttle?

Thank you for your interest in Eurocomponents’ motorcycle internal throttle assembly.

There is no room for a return cable inside 1″ bars.
Grip needs to be returned manually to the idle position, like on older motorcycles.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
Fax 386-274-5733
http://www.eurocomponentsusa.com

does the internal throttle assembly come with a cable is it included please call me at (512)644-7842. thank you.

Thank you for your interest in Eurocomponents’ motorcycle internal throttle assembly.

No, our internal throttle does not come with a cable.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-236-1210
Fax 386-236-1215
http://www.eurocomponentsusa.com

Hi,

I was just wondering if these would fit a Renthal Bar? As i am customising a Kwaka to Streetfighyter and have renthal bars?

Thanks

Daine

Thank you for your interest in Eurocomponents’ motorcycle internal throttle assembly.

We never tried to install our internal throttle on these specific handlebars, but as long as they are 1″ in diameter it should fit no problem.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-236-1210
Fax 386-236-1215
http://www.eurocomponentsusa.com

Thanks for the response. I have a funny idea that they are 7/8″ size, (22mm), do you have any idea where I could find one that is slightly smaller?

Hello,

Unfortunately I believe nobody makes an internal throttle assembly for 7/8″ handlebars.
We never heard of one.

Please let us know if we can be of further help.
Kind regards.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-236-1210
Fax 386-236-1215
http://www.eurocomponentsusa.com

I think these are really cool and i am working on a bobber build right now with a 96 Honda shadow. I will be getting new handle bars for it but my main question is will the internal throttle not work with different angles handle bars? Specifically a handle bar like this(http://www.oldbikebarn.com/Handlebars-Clubman-7-8-Black) i just wonder if the angle is going to be too great and affect the performance of the throttle. Thank you

-matthew

Thank you for your interest in Eurocomponents’ motorcycle internal throttle assembly.

The more curves the cable has to make, the harder it is going to be twisting the throttle grip.
We never tried installing our motorcycle internal throttle assembly on the handlebars you plan to use, but honestly we believe it is not going to be a good combination, because the angle is too sharp.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
Fax 386-274-5733
http://www.eurocomponentsUSA.com

Is the outer diameter of the throttle sleve that the grip goes over 1.125″? Are “normal 1” grips are able to be used?

Thank you for your interest in Eurocomponents’ internal throttle device.

The outer diameter on the internal throttle sleeve (where the grip goes) is 1″.
Our internal throttle is made to accept only 1″ internal diameter grips.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
Fax 386-274-5733
http://www.eurocomponentsUSA.com

Hi, re the internal throttle. can I use inverted levers and use the internal throttle assembly? same for the internal clutch assembly. all for 1″ bars.

Thank you for your interest in Eurocomponents’ internal throttle device.

Sorry, but we never tried installing our internal throttle or twist clutch with inverted levers, so we really cannot help you with this.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
Fax 386-274-5733
http://www.eurocomponentsUSA.com

Do u do an.Internel throttle.kit.for 7/8″ bars plz.email me back.thanks

Thank you for your interest in Eurocomponents’ internal throttle device.

Sorry, but we make internal throttles only for 1″ diameter handlebars.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
Fax 386-274-5733
http://www.eurocomponentsUSA.com

Hi just wanted to know if this would fit a Honda ct110 thanks

Thank you for your interest in Eurocomponents’ internal throttle device.

As long as you have 1″ diameter handlebars, our internal throttle device will fit no problem..

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
Fax 386-274-5733
http://www.eurocomponentsUSA.com

((((( come on guys they said 1″ only, it doesn’t matter what bike. stop asking “will it fit this bike?” its cable driven so kink the cable and no work, too tight of a bend and to hard to turn)))) read than ask questions!!!! they have better things to do than answer the same two questions over and over and over!!!!

IMHO

😀

We do not mind, that’s what we are here for 😉

Thank you,

Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
Fax 386-274-5733
http://www.eurocomponentsUSA.com

Do these fit on the end of the bar or does the handlebar need a groove cutting into it for the screw that is visible in the picture to slide down the bar?

Thank you for your interest in Eurocomponents’ internal throttle device.

Please check mounting instructions at the following link:
http://www.eurocomponentsusa.com/_files/pdf/E0220.mounting_instructions.pdf

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
Fax 386-274-5733
http://www.eurocomponentsUSA.com

HI, is there a video anywhere that shows this in action? ie, how to install or working?

Thanks……….

Forgot to mention, I’ve seen the instruction link, but i’m using M-Switched from Moto-Gadget and wanted to see if this unit would interrupt the electrical wires also going through the handle bars from the M-Switches :-/

Thank you for your interest in Eurocomponents’ internal throttle device.

Sorry, but there are no video instructions.
We would not recommend to install the internal throttle assembly in conjunction with several wires inside the bars, as this would impede the free movement of the throttle cable.

Please let us know if we can be of further help.
Thank you and have a good day.

Lorenzo
…………………………………………………………
Eurocomponents, Inc.
1368 North US 1 – Suite 402
Ormond Beach, FL 32174 (USA)
Phone 386-868-0696
Fax 386-274-5733
http://www.eurocomponentsUSA.com

Add a comment

*Please complete all fields correctly

Related Parts

Universal Fit Motorcycle Fluid Reservoir – Clear Plexiglass
Universal Fit Motorcycle Fluid Reservoir – Chrome Aluminum
Universal Fit Motorcycle Fluid Reservoir – Black Aluminum