Speedster Mini Motorcycle Speedo

Bobber Parts, Chopper Motorcycle Parts, Motorcycle Speedo, News 10 Comments

Our Speedster Mini Motorcycle Speedo’s feature 1.90 inches (48mm) diameter for a minimalistic look. Speed can be set in either miles per hour or km/h. If speed goes over 200, it will be displayed on the LED display. The LED dispay in the middle of the motorcycle speedo offers the following functions: total distance (odometer), maximum speed, on-board voltage, time. There are also four colored LED’s for oil pressure (red), neutral (green), high beam (blue) and turn signals (yellow). Our Speedster Mini Motorcycle Speedo’s can fit in our De Luxe Motorcycle Speedo HousingRing Motorcycle Speedo Housing and in our Alcatraz Motorcycle Speedo Housing. Speedo housings are sold separately.

 

mini motorcycle speedo speedster

10 Responses to “Speedster Mini Motorcycle Speedo”

  1. Ring Motorcycle Speedo Housing says:

    […] Speedster Mini Motorcycle Speedo […]

  2. Colin says:

    Will this work on a 2005 Sportster with the data bus connection for a speedometer?

  3. eurocomponents says:

    Thank you for your interest in Eurocomponents’ mini motorcycle speedometers.

    Yes, our Speedster Mini Motorcycle Speedo can fit your 2005 Sportster with data bus connection.

    Please let us know if we can be of further help.
    Thank you and have a good day.

    Lorenzo
    …………………………………………………………
    Eurocomponents, Inc.
    1368 North US 1 – Suite 402
    Ormond Beach, FL 32174 (USA)
    Phone 386-868-0696
    Fax 386-236-1215
    http://www.eurocomponentsUSA.com

  4. Colin says:

    Will i need the M-can adapter for the speedo to work with the databus connection?

  5. eurocomponents says:

    Colin,

    Yes, if you prefer you can use the M-can adapter for databus connection.
    Otherwise if you follow the instructions supplied with our Speedster Mini Motorcycle Speedo, you can mount it no problem on any motorcycle.

    Please let us know if we can be of further help.
    Thank you and have a good day.

    Lorenzo
    …………………………………………………………
    Eurocomponents, Inc.
    1368 North US 1 – Suite 402
    Ormond Beach, FL 32174 (USA)
    Phone 386-868-0696
    Fax 386-236-1215
    http://www.eurocomponentsUSA.com

  6. Chris Sheba says:

    Hi,
    For the speedometer “Arm” does it use a cable,
    or is the arm also electrical?
    Thanks.

  7. eurocomponents says:

    Thank you for your interest in Eurocomponents’ mini motorcycle speedometers.

    Sorry, but we are not sure what you mean for speedometer “arm”.

    Please let us know if we can be of further help.
    Thank you and have a good day.

    Lorenzo
    …………………………………………………………
    Eurocomponents, Inc.
    1368 North US 1 – Suite 402
    Ormond Beach, FL 32174 (USA)
    Phone 386-868-0696
    Fax 386-236-1215
    http://www.eurocomponentsUSA.com

  8. Chris says:

    Hi, sorry Lorenzo.

    I will ask or i should have just asked,
    Does it use a cable?

    There is Probably a better name for it but i meant the arm, needle, hand
    the thing that goes around the numbers on the face, that will only go to 200 before it digitally tells the speed.

    I don’t know if the arm, needle that spins around the face, over the numbers, that are run with a cable, to a drive on the front wheel,
    or if the arm, needle is run by electrics only.

    So like i said at the start i should have just asked, “does it use a cable”?
    Thanks kind regards Chris..

  9. eurocomponents says:

    Hi Chris,

    Our Mini Motorcycle Speedo’s use the speed sensor (no speedo cable).

    Please let us know if we can be of further help.
    Thank you and have a good day.

    Lorenzo
    …………………………………………………………
    Eurocomponents, Inc.
    1368 North US 1 – Suite 402
    Ormond Beach, FL 32174 (USA)
    Phone 386-868-0696
    Fax 386-236-1215
    http://www.eurocomponentsUSA.com

  10. De Luxe Motorcycle Speedo Housing says:

    […] Speedster Mini Motorcycle Speedo […]

Leave a Reply

Currently you have JavaScript disabled. In order to post comments, please make sure JavaScript and Cookies are enabled, and reload the page. Click here for instructions on how to enable JavaScript in your browser.